Information

The USC 100 is SCHNEIDER’s most compact automated ultrasonic cleaning solution.

Perfect surface conditions are essential for excellent coating results. With its multi-stage ultrasonic cleaning process the USC 100 delivers ideal preconditions for the subsequent coating process. Whether semi-finished lenses are prepared for spin-coating or hardcoated lenses are prepared for AR coating, it is done quick and easy.

Equipped with an internal two step DI-water regeneration using resin and active carbon filters, the system guarantees consistent cleaning results over a long period of time. During cleaning and rinsing the carriers are oscillated to enhance the process quality.

With a throughput of approx. 100 lenses an hour the USC 100 is a great cleaning solution for small and mid-sized Rx-Labs.
 

Technical Data

tank sizes and capacity (width x depth x height)

300 x 170 x 200 mm
10 l

cleaning stages

1 US-cleaning station (with detergent)
1 tap-water rinsing station
1 DI-water rinsing station
1 drying station

lens diameter

30 – 95 mm 

lenses per carrier

10 lenses (5 pairs)

cycle time

5 min/stage (approx. 20 min. floor to floor)

lenses per hour

approx. 100 lenses (50 pairs)

power consumption

4.5 kVA

machine weight

approx. 500 kg (1102 lb.)

dimensions (width x depth x height)

approx. 840 x 730 x 2000 mm (33 x 29 x 79 inches)

All data subject to change without notice. Please verify details with SCHNEIDER.

Downloads

  USC 100
PDF, 278 KB