Job trays contaminated by polish can contribute to dirty and scratched lenses as well as conveyor belt issues.
SCHNEIDER’s tray washing solution TWA, powered by Insomec, offers washing, cleaning and drying in one machine. The reliable tray washer comes with adjustable cleaning frequencies and various cleaning programs, ranging from maintenance to intensive cleaning. The tray flow remains uninterrupted.
To accommodate all kinds of different tray sizes, it is equipped with exchangeable grippers and an adjustable conveyor belt.
The process starts with a pre-cleaning step, removing larger particles from the tray. Afterwards, a handling system transfers the job tray to the processing chamber, where it is soaked with detergent and water, followed by a subsequent high-pressure cleaning process. Oscillating movements allow for efficient cleaning of the entire surface. The specially developed cleaning detergent guarantees reliable and reproducible cleaning results.
Integrated pre and fine filters prevent contamination of the cleaning fluid. The drying process completes the cleaning cycle. All in all, the TWA is the reliable solution for a long-term clean production.
- Suitable for all surfacing and coating job trays
- Adjustable cleaning parameters
- Easy-to-remove dirt drawer
- Easy maintenance
adjustable cleaning programs
maintenance cleaning: ~ 40 job trays/hour
intensive cleaning: ~ 20 job trays/hour
5 kVA avg.
6 bar (87 psi)
one water tank with clear water and detergent TW 100
approx. 650 kg (1433 lb.)
dimensions (width x depth x height)
approx. 2680 x1394x 1989 mm (106 x 55 x 79 inches)
All data subject to change without notice. Please verify details with SCHNEIDER.