The fully automated lens cleaner, LCU 120, effectively cleans large volumes of lenses in a very small footprint. Depending on the requirements, the brush cleaner is available in two versions. The basic version is designed specifically for cleaning the backside of frontside coated lenses. The extended version cleans the frontside as well as the backside.
The lenses are automatically transferred through the multi-step process. Rotating brushes clean the lenses gently and without damage. The special brush-to-lens arrangement immediately casts off the dirt particles, so they can’t scratch the sensitive lens surface. Contaminations like adhesive residues or fingerprints are efficiently removed.
Finally, the lenses are rinsed with DI water, before they are dried and transferred back to the tray.
Connected to the SCHNEIDER Control Center, the brush cleaner is subject to continuous process monitoring.
LCU 120 is the perfect solution for midsized and large labs that value fast but high-quality cleaning results – ready for subsequent coating processes.
- Fully automated cleaning process
- Excellent cleaning results
- 100 – 120 lenses per hour
- No pretreatment or precleaning required
- Small footprint combined with high efficiency
- Low total cost of ownership
- Short ROI periods
from 45 to 80 mm
all common materials
9.6 kVA avg., rated current 20 A, pre fuse 32 A
min. 6 bar (87 psi), oilfree
DI-water, conductivity < 10 μS/cm
approx. 420 kg (926 lb.)
dimensions (width x depth x height)
approx. 1200 x 2000 x 2105 mm (48 x 79 x 83 inches)
All data subject to change without notice. Please verify details with SCHNEIDER.