Information
The DHC 300 is the first modular ultrasonic cleaning and hardcoating solution that can be configured to the individual process needs of the larger lab. The great choice of options provides highest flexibility and adaptability.
Two individual robot handling systems guide the lenses through the multi-stage process. The wide range of options includes ultrasonic cleaning and rinsing modules, curing modules like fan assisted hot air or IR drying, and thermal cure primer and dip-coating modules. Individual servo drives allow for speed profiling to achieve optimized lacquer distribution across the lens. The ideal recipes can be selected via a touch screen to match the lens material and type to achieve best results in adhesion, quality, and cosmetics.
As requirements change, existing setups can be adapted, new functions can be added easily with minimal effort thanks to the plug-and-play frame design in combination with slide in modules.
Flexible and adaptable, the DHC 300 is a future-proof investment.
DHC 300
Multi-stage process
Ideally reflecting the lab’s individual process requirements.
Plug-and-play frame design and slide in modules
Easy to exchange and maintenance friendly, for minimized downtime .
Benefits
- Customizable and adaptable machine configuration
- Two available tank sizes for primer and lacquer
- (Semi-)automated fill and level control on all tanks
- Automated detergent and lacquer refill (optional)
- Minimized downtime for maintenance and cleaning
Technical Data
tank sizes and capacity cleaning tank (width x depth x height)
cleaning/rinsing/DI tank: 650 x 130 x 185 mm, ~ 17 l
primer/lacquer tank: 650 x 130 x 155 mm, ~ 14 l
primer/lacquer tank: 235 x 130 x 140 mm, ~ 7 l
cleaning – pre-configured version
10 stage process (incl. US cleaning, tap water rinsing,
DI water rinsing with slow-lift, IR drying, cool down)
hardcoating – pre-configured version
10 stage process (incl. primer, hot air + IR precure,
hardcoating, hot air + IR precure)
lens size
30 – 85 mm diameter
lenses per carrier
26 + 1 lenses
cycle time
5 min cycle time/stage (approx. 2 h 10 min floor to floor)
lenses per hour
324 lenses (162 pairs)
machine weight
depending on configuration
dimensions (width x depth x height)
depending on configuration x 1824 x 2032 mm (72 x 80 inches)
all data subject to change without notice. Please verify details with SCHNEIDER.